Article

CAA to End Permanent Aircraft Address Allocation for 978 MHz Electronic Conspicuity

From 31st March 2027, the CAA will stop issuing permanent ICAO 24-bit addresses for 978 MHz UAT electronic conspicuity devices. What affected UAS Operators and UK SORA applicants need to check.

Published UK Drone Guide Team

The UK Civil Aviation Authority (CAA) has announced that it will stop issuing permanent ICAO 24-bit aircraft addresses for 978 MHz Universal Access Transceiver (UAT) electronic conspicuity devices from 31st March 2027.

The change was announced in SkyWise alert SW2026/462 on 20th November 2026. The CAA says affected equipment must be capable of generating a self-assigned temporary aircraft address in accordance with RTCA DO-282B/C.

The alert also specifically advises applicants seeking an Operational Authorisation (OA) to confirm that their equipment supports this capability before submitting an application.

This is relevant to UAS Operators using 978 MHz UAT equipment as part of an electronic conspicuity or air-risk mitigation arrangement. It is not a new requirement for every drone to carry electronic conspicuity equipment.

What is changing?

An ICAO 24-bit aircraft address is an identifier used by certain surveillance and electronic conspicuity systems. The CAA currently provides an address allocation process for relevant equipment.

From 31st March 2027, the CAA will no longer issue permanent ICAO 24-bit addresses for 978 MHz electronic conspicuity devices. Instead, affected devices must be able to generate a temporary, self-assigned address in accordance with the applicable technical standard.

The CAA's notice states:

From 31 March 2027, the CAA will no longer issue ICAO 24-bit aircraft addresses for 978MHz Electronic Conspicuity devices.

It then tells Operational Authorisation applicants to check the capability before applying and encourages operators to review their existing equipment and replacement plans.

The announcement concerns 978 MHz UAT devices. It should not be read as a blanket withdrawal of ICAO addresses for all aircraft or as a change to every electronic conspicuity technology, including equipment operating on 1090 MHz.

How do temporary aircraft addresses work?

A compatible 978 MHz UAT device generates its own temporary address rather than relying on a permanently allocated ICAO 24-bit address.

The CAA's electronic conspicuity guidance describes the use of a pseudo-random address following acquisition of a GNSS position fix. It also identifies the address qualifier used to distinguish a non-ICAO address.

The purpose is to allow the device to transmit an appropriate identifier without requiring a permanent allocation for each installation. Equipment must still meet the relevant technical requirements, including those specified in RTCA DO-282B/C.

Operators should check the actual capability and configuration of their equipment rather than assume that every device capable of transmitting on 978 MHz supports the required temporary-address function.

Example equipment: uAvionix ping978EC

One example of equipment designed for these UK requirements is the uAvionix ping978EC, a 978 MHz UAT ADS-B transceiver introduced in March 2026 for Specific Category BVLOS operations.

The device transmits ADS-B Out on 978 MHz and receives ADS-B In traffic on both 978 MHz and 1090 MHz. According to uAvionix, it meets the RTCA DO-282B Class A1S performance standard and is designed to support the electronic conspicuity arrangements described in CAP 1391 and CAP 3040.

Crucially for the CAA's address allocation change, the ping978EC generates a temporary non-ICAO 24-bit aircraft address when powered on and after obtaining a GNSS fix. It does not require a permanent ICAO address allocation for that function.

uAvionix also publishes a Statement of Compliance intended to help UAS Operators declare the equipment specification to the CAA when applying for an Operational Authorisation. The manufacturer states that an Ofcom UAS Operator Radio Licence is still required.

The ping978EC is an example of equipment built around the temporary-address approach, not a CAA endorsement of a particular product or an automatic approval for an operator's safety case. Operators must still establish that their equipment and proposed use satisfy the requirements applicable to their operation.

What does this mean for UK SORA applicants?

Electronic conspicuity may form part of an operator's proposed approach to managing air risk, particularly for Beyond Visual Line of Sight (BVLOS) operations. Whether it is suitable depends on the operation, the equipment and the safety case accepted by the CAA.

The CAA has expressly linked its new notice to Operational Authorisation applications. Applicants proposing to use 978 MHz UAT equipment should therefore establish whether the device can generate a compliant self-assigned temporary address before relying on it in an application.

That check may involve the equipment manufacturer's documentation, firmware and configuration, and the technical evidence supplied with the application.

Existing OA holders using affected equipment should also review whether their documented equipment configuration and assumptions remain accurate. The notice does not itself say that every existing OA must be amended.

The change does not create a new, generally applicable UK SORA air-risk mitigation or remove any existing obligation to demonstrate the effectiveness of the measures used in an application.

What about existing devices and allocated addresses?

The SkyWise notice confirms that new permanent address allocations will stop from 31st March 2027. It does not explicitly state that all previously issued permanent addresses will be cancelled on that date.

That distinction matters for operators who already have equipment configured with an allocated address. They should not assume either that the existing allocation will remain acceptable indefinitely or that the CAA has ordered its immediate withdrawal.

Operators with affected equipment should check the CAA's current guidance and seek clarification where their configuration or Operational Authorisation depends on a permanent address.

The CAA also encourages operators to consider the change when planning equipment replacements.

Does this make electronic conspicuity mandatory for drones?

No. This announcement changes the address allocation arrangements for a particular type of electronic conspicuity equipment.

It does not require every drone operating in the Open or Specific Category to carry a 978 MHz UAT transmitter. Nor does it mean that electronic conspicuity alone is sufficient to obtain a BVLOS Operational Authorisation.

Any equipment requirement for a particular Specific Category operation depends on the applicable regulatory framework and the conditions of the operator's approval.

What should affected operators do?

Operators using, procuring or proposing 978 MHz UAT electronic conspicuity equipment should check whether the device supports temporary self-assigned addresses under RTCA DO-282B/C, confirm that the feature is correctly configured and review any safety case or OA application that refers to a permanent address.

For existing installations, the main outstanding question is how the CAA intends to treat permanent addresses already allocated before the deadline. The published alert does not provide a detailed transition policy for those allocations.

The CAA's implementation date is 31st March 2027. Further information is available in SkyWise alert SW2026/462, its electronic conspicuity guidance and its spectrum and frequency management guidance.

Written by

UK Drone Guide Team

Articles are written for UK Drone Guide to explain drone rules, regulatory changes and flight planning topics in a clearer, more practical way.

Keep learning

Suggested next articles

Continue building your knowledge with more guides hand-picked for you.

View all articles →